Maintenance of 24 tube 4 lamp controller

Basic Info

Brand: KEHUAN

Place Of Origin: China

Voltage: 48V/60V/72V

Undervoltage: 41V/51V/61V

Accelerator Voltage: 0.8V-4.3V

Wire Diameter: terminal

Color: customizable

Power: 1200W-1500W

Maximum Current: 50A-60A

Illumination: 4 indicator lights

Additional Info

Packaging: carton packaging

Productivity: Annual production of 2 million

Transportation: Ocean,Land,Air,Express

Place of Origin: China

Supply Ability: Motor, controller, differential box, 20 sets per month, 2 million sets per year

Port: SHANGHAI,QINGDAO,LIANYUNGANG

Product Description

Is the controller always in a bad mood?

The 24-tube 4-lamp controller often goes out of service due to contact oxidation and load imbalance, just like the sudden power outage of the Electric Tricycle Controller and the jamming of the Electric Tricycle Motor, which affects the operation of the equipment. This is an old trouble of the lighting system. Are you also worried that its maintenance is more complicated than that of the Electric Vehicle Controller, and the tubes will burn and the lights will flash if you are not careful? In fact, a simple maintenance process can solve it: it is "sensitive but durable" and is responsible for stabilizing the current distribution of the 24-tube lamps. Regular maintenance can make its temper "gentle". After maintenance according to the steps, short-circuit faults are reduced by 60%, the light flicker rate is reduced by 70%, and the service life can be extended by more than 1 year.

This controller is mostly installed in workshop lighting and outdoor advertising screens. When maintaining it, the focus is on whether the terminal is loose and whether the capacitor is bulging. Similar to the logic of taking care of the Electric Tricycle controller, the key is "anti-oxidation and load control".

Product features:

Low maintenance threshold: unscrew the shell to check, no professional instruments are needed.

Stable adaptability: compatible with 24-tube system with 4 lamps in parallel, strong load balancing.

Tips:

Use fine sandpaper to gently rub the wiring contacts every quarter, and then apply vaseline to prevent oxidation.

The power of a single lamp should not exceed 50W, and the total load should not exceed the rated upper limit of 200W of the controller.