Helical tooth brake gear motor in the gearbox family, with its high transmission efficiency, small size, high precision, large carrying capacity, economical and practical, beautiful appearance, accurate positioning, large carrying capacity, suitable for a variety of DC servo motors, AC servo motors, three phase DC motors, but also because of the significant advantages, but also to make its use of the coverage will be more extensive.
In the usual mechanical operation, we want to enhance the output torque of the servo motor, we have to use high-power servo motors, not only expensive, but also requires the motor to have a relatively strong structure, so if you want to enhance the torque, you can use the helical gear motor to match, not only affordable, the effect is also very good, and his scope of application is also very wide, you can use it as a lawnmower motors, Electric Tricycle Motor, motorcycle motor! Use.
But if in the operation process must pay attention to the daily inspection and protection of the reducer, first of all, is about the gear check, gear shall not have broken teeth, tooth surface shall not appear flaking or cracks and other phenomena, and secondly about the reducer bearing check, with heated mineral oil cleaning, until gently rotate the reducer by hand when the inner seat of the reducer ring in any position does not happen to be jammed so far, and then use the ruler to check the clearance. The last is the inspection of the reducer shaft, the ellipticity and taper on the shaft diameter shall not be greater than 0.015-0.025mm, and the roughness of the surface of all the coordinating dimensions should be able to meet the requirements of the drawings, and then it is the inspection of the bearing cover and the box, make sure that it is in a normal state.
